Table of Contents
Advertisement
Note:
After a firmware update, the telephone system will automatically be re-
started. The current settings remain unchanged. During the download
and the initialization phase of the telephone system, the power supply
MUST NOT be interrupted. Should the update fail, please contact the
support team of Tiptel.com GmbH Business Solutions.
Loading configuration data:
This menu is used to transfer the current configuration data to your telephone sys-
tem. After a data backup, select the configuration file extension in .cfg on your PC.
Note:
After loading new configuration data, the telephone system will auto-
matically be restarted. When transferring the data to your telephone
system, all call data records will automatically be deleted.
Loading WAV-file for music-on-hold
It is possible to record an audio file in WAV format and to save it in the telephone sys-
tem. For recording or converting you can use the "Sound Recorder" of your Windows
PC to be found under "Start", "Programmes", "Accessories", "Entertainment",
"Sound recorder" (depending on the version of the Microsoft operating system). Set
the volume under "Modify/Audio Properties". In case you would like to change the
volume later you can use the corresponding function in the "Effects Menu". After
completion of your recording, it is recommended to convert it to the following data
format: PCM, 8 kHz, 16 bit, mono. Then you can save the recording and transfer it via
the web interface to the telephone system The length of the recording must not ex-
ceed 90 seconds.
Note:
The volume will be determined by the generated wave file. You may
want to adjust the volume by using the "Sound Recorder". Note for re-
cording studios: The factory default music in the telephone system has
a sound level of -12 dBm.
Restart
Use this function to restart your telephone system manually.
Menu: Voicemail
Note:
This menu is only available with a tiptel VCM-Module installed.
For details, please refer to the Installation Manual "Voicemail / Call Manager Module".
Configuration: Settings
46
Advertisement
Table of Contents
