Terminals; Analogue Telephones; Isdn Telephones - TIPTEL 822XT rack Installation Instructions Manual

Isdn telephone system

Hide thumbs Also See for 822XT rack:

Table of Contents

Terminals

It is possible to connect analogue telephones, ISDN telephones, answering ma-

chines, fax machines and PCs to the tiptel.com 822XT / 822XT rack telephone sys-

tem. The range of operation and use of features depend on the terminal used. Please

also observe the User's Manuals for the terminals.

Only CE-approved terminal units complying with standards ETSI TS 103 021 (ana-

logue terminals) or CTR 3 (ISDN terminals) should be connected to the telephone

system.

Analogue telephones must comply with the following specifications:

•

DTMF telephones (dual tone multiple frequency):

The dialling information is transmitted via a tone sequence. In addition to the

and

keys, the " " and " " keys are also available.

Additionally, the following feature should be supported by the analogue telephones

in order to ensure full functionality of the telephone system:

•

CLIP and/or CNIP function:

Telephones that can display the caller's number and/or name.

Note:

Pulse dialling telephones are NOT supported.

Telephones that can be operated on S0-ports according to Euro ISDN standard

DSS1.

For this function, ISDN telephones require the associated internal subscriber number

(MSN). The input procedure is described in the User's Manual for the ISDN tele-

phone.

Notes

Table of Contents