Connecting Chili To Genie - oticon Chili Fittings Manual

connecting chili to genie

connecting the Programming Shoe
1. Open the battery door on the instrument and slide the
programming shoe into the guide as shown. (Make sure the
battery is fresh).
2. Close the battery door and attach the HI-PRO or
nOAHlink cable.
18 OticOn chili FITTInG GuIde
1
2
neARcom
For greater flexibility and comfort use neARcom without
cables to fit Chili instruments.
detect the instruments
1. Switch on the instruments using fresh batteries.
2. Lay neARcom on the table and place the instruments
in the middle of the neck loop.
3. Click detect for cordless programming.
note: make sure the instrument volume control is set to a
position between step 1 and 4 during detection.
Cordless programming
Wired programming
3
19