Page 1
Frequently asked questions to Oticon ConnectClip...
Page 2
Priority Question Answer What takes priority if ConnectClip can be paired with up to 8 devices but can only ConnectClip is connected/paired be connected to one device at any given time. The first to several Bluetooth devices? connected device has priority.
Page 3
If one set of hearing aids is Only one set of hearing aids can be paired to a ConnectClip already paired to ConnectClip, at a time (either a monaural hearing aid or a binaural pair of how can I pair a second set? hearing aids).
Page 4
Yes, in save & exit screen in Genie 2 | 2017.2. If instruments ConnectClip and hearing aid? and ConnectClip need to be paired again, it must be done on the ConnectClip (outside Genie 2 session). Can ConnectClip be used with...
Page 5
Yes, any standard USB connection can be used for charging the USB outlet on a PC? ConnectClip. Note however that some PCs/Laptops will shut off USB power when in idle mode. Can it be left plugged in for a few Yes, it can be left plugged in for when not in use.
Page 6
ConnectClip How long will it hold the charge The capacity for the battery is several months if ConnectClip if unplugged and unused for is not turned on. several or more days? ON app Can ConnectClip be used with Yes, the OticonON App can be used to adjust the volume of...
Page 7
20 meters in an ideal environment*. What happens if ConnectClip is ConnectClip will power off if hearing aids are out of range out of range from hearing for more than 30 minutes. If connection is lost in remote...
Can ConnectClip be placed on a Yes, this is possible (but it is not the intended use). table to use among a group of ConnectClip is optimised for 1:1 use, so the effectiveness of friends? such a setup will depend on the environment, competing noise and where the other speakers are located.
ConnectClip Care and Maintenance How does my client clean Use a soft dry cloth to clean ConnectClip. It must never be ConnectClip? washed or immersed in water or other liquids. Is it water resistant? ConnectClip is not water resistant. What is the IP rating? ConnectClip is not currently IP rated.
Page 10
ConnectClip Technology Does ConnectClip use the same No, ConnectClip has a new noise reduction system, based on noise reduction as in the OpenSound Navigator. ConnectLine microphone? Which firmware version do Opn Opn hearing aids require firmware version 5.0 or later.
Page 11
No, only with models from the Oticon Opn family with Oticon hearing aids? firmware 5.0 or higher. And only hearing aids with 2.4 GHz Twinlink Connectivity. Note: Please refer to the instructions for use manual and www.oticon/connectivity for more information.
Need help?
Do you have a question about the ConnectClip and is the answer not in the manual?
Questions and answers