Connecting To Wired Audio Input - oticon streamer Instructions For Use Manual

6.4.1 Connecting to wired audio input

When the included audio cable is connected to an audio player and Streamer,
Streamer starts streaming after the Audio button is pressed shortly. The
light around the Audio button turns on constant light
(see section 7).
Use the included audio cable to connect Streamer to the audio source.
34
6.4.2 Connecting to a wireless audio source
The Bluetooth connection between Streamer and the audio source must
be prepared so the two devices connect wirelessly to each other. This initial
configuration of the devices is referred to as pairing. If you have not paired
Streamer to your ConnectLine adapter or other Bluetooth audio source, you
should follow the pairing guidelines in section 6.9 or the specific
ConnectLine adapter guide.
A wireless audio source can be connected to Streamer when:
• the Connect function of Streamer is turned on, and
• Streamer and the audio source is inside the Connect range
Both a ConnectLine TV adapter and another Bluetooth audio source can
connect to Streamer at the same time but only one can be activated at a
time.
The ConnectLine TV adapter always has priority compared to other external
Bluetooth audio sources, e.g. a Bluetooth stereo device/player.
35