Fitting corda
with Moulds in genie
2
1. Select Corda
2
instead of ear Mould.
2. Go to the fitting step and verify the vent size of the Moulds.
Select "Open Dome" for an Open Mould with 4 mm vent or
"Plus Dome" for a 3 mm vent.
Note: Fine tuning might be necessary when working
with Moulds.
40
OticOn Agil FITTING GUIDE
connecting Oticon Agil to genie
Oticon Agil is programmed using the genie fitting
software compatible with nOAh 3.0 and Oticon
programming cable #3 (right and left)
the table shows how to connect
the different styles when fitting with cables
instrument Style
Programming interface
miniRITE
Flex Connect
BTE/RITE
Programming Shoe
ITC/ITE
Programming Adapter
CIC/MIC
Flex Connect
6
41