Inserting Label Material; Removing Spent Backing Paper; Removing Glue Residue - Avery Dennison ALX 92x Operating Manual

06/06 Rev. 3.05-01

Inserting label material

WARNING!
•
Rotating parts can trap items and
draw them in!
When working on the device, do
not wear loose jewellery, long
sleeves, long hair, and similar.
Close the devices cover before
printing.
•
During operation, the printhead
can become hot.
Be careful when touching the
printhead!

Removing spent backing paper

The backing paper rewinder can exactly
rewind the amount of backing paper remai-
ning from a material roll with 300 mm dia-
meter [2A].
CAUTION! - A backing paper roll
exceeding the diameter limit can
stall and damage the machine!
Always remove the backing paper
from the rewinder if you insert a
new material roll!
Assuming backing paper has gathered on
the rewinder:
1. Pull out the release button [2B].
The tensioning mechanism of the rewinder
is slackened.
2. Remove the rewound backing paper.

Removing glue residue

If necessary, clean the following compo-
nents:
•
Printhead
•
Dispensing plate
•
Deflection rollers
•
Drive roller
•
Pressure rollers
Follow the directions provided in topic sec-
tion Maintenance and
OPERATING MANUAL
ALX 92x
Cleaning.
[1] Rewound backing paper on the ALX 92x (A).
A
[2] Removing rewound backing paper.
A Backing paper roll
B Release button
6
Setup
A
B