Attach the thread to the servo lead and
carefully thread it though the wing. Once you
have thread the lead throught the wing, remove
the string so it can use for the other servo
lead. Tape the servo lead to the wing to prevent
it from falling back into the wing.
Electric wire.
Wing bottom.
Electric wire.
Secure the servos with the screws pro-
vided with your radio system.
www.seagullmodels.com
Thread.
half.
include)
Thread.
Plastic tape.
Aileron electric.
Repeat the procedure for the other wing
ENGINE MOUNT.
See pictures below:(Engine mount do not
4x30mm.
Mark and drill 4 holes for engine mount.
Thread locker glue.
5