Seagull Models Extra 260 Assembly Manual page 7

You should mark which tube is the vent
and which is the fuel pick up when you attach
fuel tubing to the tubes in the stopper. Once
the tank is installed inside the fuselage, it may
be difficult to determine which is which.
Rubber band.
Fuel pick up tube.
Blow through one of the lines to ensure
the fuel lines have not become kinked inside
the fuel tank compartment. Air should flow
through easily.
WHEEL AND WHEEL PANTS.
1) Assemble and mounting the wheel pants
as shown in the following pictures.
www.seagullmodels.com
installation:
Fuel tank.
Vent tube.
Fuel fill tube.
tool cutting and cut-off wheel.
protective goggles.
2) Follow diagram below for wheel pant
Wheel Collar.
Axle.
Wheel.
7mm.
14mm.
3) You have to trim each axles and using a
Caution when cutting the axles wear
57mm.
Plywood Washer.
Nut.
Nut.
Landing Gear.
Wheel Pant.
7