Seagull Models Extra 260 Assembly Manual page 16

EXTRA 260. Instruction Manual.
Repeat the procedure for wing panel as
same as elevator pushrod.
Pushrod L= 104mm.
Metal Levis.
2) With the radio on, check the operation
of the rudder. Adjust the cables so when the
rudder servo is centered, the rudder is
centered as well. There will be tension on the
cables. Adjustments can be made at the rudder
control horn and at the servo arm. Once
adjustments are made, secure the servo arm
to the rudder arm servo using the screw that
came with the servo
Right side.
Repeat the procedure for orther aileron.
RUDDER PULL - PULL CABLE SYSTEM.
Cable.
See pictures below:
Left side.
Pushrod.
Metal clevis.
Cable.
Control horn.
M3 lock nut.
Cable wire.
1) Insert servo arm into servo.
16