Seagull Models Extra 260 Assembly Manual page 15

Repeat the procedure for orther wing.
ELEVATOR CONTROL HORN INSTALLATION.
1) Elevator control horn:
Using the same tectniques used aileron control
horn. See picture below.
Horizontal fin.
Elevator control horn.
Repeat the procedure for orther
elevator.
RUDDER CONTROL HORN
INSTALLATION.
Rudder control horn:
Using the same tectniques used aileron control
horn. See picture below.
www.seagullmodels.com
Elevator.
ELEVATOR PUSHROD INSTALLATION.
below.
elevator.
Elevator pushrods assembly follow pictures
Pushrod L= 146mm.
M look
3
Metal Levis.
Center the servo using the radio system.
Elevator pushrod.
Repeat the procedure for orther
AILERON PUSHROD INSTALLATION.
Rudder
control horn.
15