Improved Setting Operations In The Custom Fader Bank Popup Window - Yamaha RIVAGE PM Series Supplemental Manual

Improved setting operations in the CUSTOM FADER BANK popup window

Improved setting operations in the
CUSTOM FADER BANK popup window
Setting operations in the CUSTOM FADER BANK popup window have been improved. In addition,
a custom meter has been added to the meter area, and the custom fader bank settings can now be
stored in the User Setup library.
1
3
5 6 7
1
BAY select buttons
Select the desired BAY or master fader for which you wish to set up a custom fader bank.
2
SET BY SEL button
If this button is on, you can use the [SEL] key to assign the corresponding channel to the
selected fader assign button.
3 Bank select buttons
Select the bank for which you wish to set up a custom fader.
Press the selected bank select button again to access the NAME popup window, in which you
can set up the bank label.
4 Fader assign buttons
Select the position to which you wish to assign a custom fader. Press the selected fader assign
button again to access the CH SELECT screen, in which you can select a channel to assign.
These buttons also indicate the assigned channels.
2
4
8 9 )
5 BANK CLEAR button
Clears the assignment for the selected bank. Pressing this button will open a confirmation
dialog box. Press OK to clear the assignment. Otherwise, press CANCEL to return to the
previous screen without changing the setting.
6
BANK COPY button
Press this button to copy the settings of the selected bank.
7
BANK PASTE button
Press this button to paste the copied settings to the selected bank.
8
MOVE button
Press this button to engage Move mode to move a fader block.
After you select the move source using the fader assign buttons, press the TO button. Then
select the destination using the fader assign buttons, and then press the MOVE button.
9
INSERT button
Press this button to engage Insert mode to insert a fader block.
After you select the position for the insert using the fader assign buttons, select the number of
insertions (1–4). Then, press the INSERT button.
) CLEAR button
Press this button to clear the fader assignment.
NOTE
The custom fader settings can now be stored in the User Setup library. These settings include the
custom fader bank labels and channel assignment parameters.
18
CONTENTS
RIVAGE PM series V3 Supplemental Manual