Setting A Custom Fader Bank; Using Talkback - Yamaha CL3 Owner's Manual

Setting a custom fader bank

1.
Press the SETUP button in the display screen.
2.
Press the USER SETUP button in the CURRENT
USER area.
3.
Press the CUSTOM FADER tab near the
bottom of the screen.
4.
In the CUSTOM FADER BANK / MASTER
FADER screen, press the button for the
custom fader bank you want to set up.
5.
In the FADER field, press the channel strip
number button.
6.
Press the [SEL] key for the channel that you
want to assign in the Channel Strip section.
7.
In the same way, select other channels that
you want to assign.

Using talkback

1.
Connect a mic to the front panel TALKBACK
jack.
2.
Press the MONITOR button in the display
screen.
3.
Press the ASSIGN button in the TALKBACK
area.
4.
In the ASSIGN area, select a bus to which you
want to send the talkback signal.
5.
Press the TALKBACK ON button.
6.
While observing the TALKBACK IN meter, use
the front panel VOLUME knob to adjust the
level.
Setting a custom fader bank
47
Owner's Manual