Attaching The Device Description; Starting The Printer Writer - SEH Print Server Installation Manual

Print Server Installation Manual
15. Depending on the printer type, enter the following parameters
into the mask under SYSDRVPGM:
- for printers supporting PJL: *HPPJLDRV
- for IBM network printers: *IBMPJLDRV
- for printers supporting SNMP: *IBMSNMPDRV
Further details of the device description can be used alternatively. We
recommend that you choose a significant description for the keyword TEXT.
16. Press the Enter key.
The device description is created.
7.4

Attaching the Device Description

Proceed as follows:
1. Check whether the device description is attached:
WRKCFGSTS *dev <arbitrary name>
2. If the status is 'detached', attach the device by entering 1.
7.5

Starting the Printer Writer

Proceed as follows:
1. Enter the following command:
STRPRTWTR<arbitrary name>
The printer writer is started.
2. Make sure that the status of the output queue is RLS. Release
the output queue using the RLSWTR command, if necessary.
The installation has been completed.
AS/400 - Printing via a Device Description
62