Integrating Shell Scripts Into Bsd Systems - SEH Print Server Installation Manual

What entries are
necessary?
Procedure
Print Server Installation Manual
4.3

Integrating Shell Scripts into BSD Systems

If the shell scripts are located in the '/etc/printserver' directory, you
must adapt them and integrate them into the spooler.
The following entries are required for the installation:
User input
Name of the adapted shell script
Name of the zero device
Name of the spool directory
Name of the printer (visible to the printer after installation)
All four names may be assigned arbitrarily. You may also use one
name for all four entries. Every name assigned, however, must be
used continuously throughout the installation sequence.
Follow the instructions to carry out the installation:
'Adapting the Shell Script'
'Creating the Printer Device'
'Creating a Spool Directory'
'Entering the Printer into the Spooler System'
'Releasing the Printer'
Adapting the Shell Script
The shell script must be adapted to your network. A copy of the shell
script is therefore
'/etc/printserver/interfaces' directory. After that, the shell script is
adapted to your system. This means that the host name of the print
server, the logical printer, and the FTP path must be edited.
Example in the text
my_script
my_device
my_spool
my_printer
37
38
39
40
created and
Printing via Shell Scripts
39
saved in the
37