SEH Print Server Installation Manual page 19

Print Server Installation Manual
4. Enter the following parameters into the screen mask:
[TOP]
*Name of QUEUE to add
*Name of QUEUE DEVICE to add
*BACKEND PROGRAM pathname
ACTIVATE the queue?
Should this become the Default queue?
Queuing DISCIPLINE
ACCOUNTING FILE pathname
HOSTNAME of remote server
Name of QUEUE of remote server
5. Press ENTER to confirm.
6. Check whether the following entry has been added to the
'/etc/qconfig' file:
Example: MY_QUEUE:
device=MY_QUEUE
up=true
host=IC0001FF
rq=lp1
MY_QUEUE:
backend=usr/lpd/rembak
7. Change to the 'etc' directory.
8. Test the print server:
Syntax: lp -d <host name of print server> <file name>
Example: lp -d IC0001FF hosts
Printing via the LPD Protocol
[MY_QUEUE]
[MY_QUEUE]
[/usr/lpd/rembak]
yes
no
first come first serve
[ ]
[IC0001FF]
[lp1]
19