SEH Print Server Installation Manual page 14

Procedure for
ULTRIX
Print Server Installation Manual
Please note that periods separate the address groups of the
hardware addresses in this file, whereas colons separate fields from
each other in an individual entry. In ULTRIX and some other UNIX
systems, the individual fields of an entry are separated from each
other using the tab character.
Proceed as follows:
1. Add the following entry to the '/etc/bootptab' file:
Syntax for Ethernet:
<host name>:ht=ether:ha=<hardware
address>:ip=<IP address>
Example for Ethernet:
IC0001FF:ht=ether:ha=00.c0.eb.00.01.ff:ip=
192.168.0.123
Syntax for Token Ring:
<host name>:ht=tr:ha=<hardware
address>:ip=<IP address>
Example for Token Ring:
IC0001FF:ht=tr:ha=00.c0.eb.00.01.ff:ip=
192.168.0.123
2. Please make sure that the 'bootp' print daemon rereads the
configuration file.
Proceed as follows:
1. Add the following entry to the '/etc/bootptab' file:
Syntax for Ethernet:
<host name> 1 <hardware address> <IP
address>
Example for Ethernet:
IC0001FF 1 00:c0:eb:00:01:ff 192.168.0.123
Syntax for Token Ring:
<host name> 6 <hardware address> <IP
address>
Example for Token Ring:
IC0001FF 6 00:c0:eb:00:01:ff 192.168.0.123
2. Please make sure that the 'bootp' print daemon rereads the
configuration file.
Information
14