System V (General) - SEH Print Server Installation Manual

Requirements
Print Server Installation Manual
2.8

System V (General)

When installing the print server in System V systems, you must
install the print server as a remote printer and then enable it.
The print server is known to the network via its IP address, see:
13.
The host name has been assigned to the IP address, see:
The print server is connected and the printer is turned on.
Proceed as follows:
1. Log on as root.
2. Enter the print server into the spooler as a remote printer:
Syntax: lpsystem -t bsd <host name>
Example: lpsystem -t bsd IC0001FF
3. Install a remote printer:
Syntax: lpadmin -p <printer name> -s <host
name>!<logical printer>
lpadmin -p my_printer -s
Example:
IC0001FF!lp1
With print servers with several physical printer ports, the logical printer is used to
address the port. For more information, please read the section 'Logical Printers'
in the user manual.
4. Enable the printer:
Syntax: accept <printer name>
enable <printer name>
Example: accept my_printer
enable my_printer
Printing via the LPD Protocol
12.
28