Table of Contents
Advertisement
Print Server Installation Manual
5.4
Installation of the Print Server in the RSO Spooler
The IP address of the InterCon print server and TCP/IP port 2900
must be entered into the RSO spooler. The SPSERVE utility program
is available for this purpose.
Proceed as follows:
1. Call the SPSERVE utility program.
2. Enter the IP address and TCP/IP port 2900 into the RSO spooler
as the printer.
3. Enter '9000-PCL' as the printer type, for example.
5.5
Defining TCP/IP Ports
Proceed as follows:
1. Define the TCP/IP port:
Syntax:
/BCMAP <printer>,<processor>,Port=2900
Example:
/BCMAP my_printer,my_system,Port=2900
Printing in BS2000
48
Advertisement
Table of Contents
Need help?
Do you have a question about the Print Server and is the answer not in the manual?