Table of Contents
Advertisement
Print Server Installation Manual
Several UNIX systems show a warning indicating that other users are
permitted to access the zero device. You may ignore this warning.
Releasing the Printer
Once the printer has been entered into the spooler system, you must
enable the printer so that print jobs can be accepted.
Proceed as follows:
1. Enter the following command:
Syntax:
accept <printer name>
enable <printer name>
Example:
accept my_printer
enable my_printer
2. Test the new printer:
lp -d<printer name> /etc/printserver/<file>
Syntax:
Example:
lp -dmy_printer /etc/printserver/sys5.sh
Printing via Shell Scripts
36
Advertisement
Table of Contents
Need help?
Do you have a question about the Print Server and is the answer not in the manual?