SEH Print Server Installation Manual page 60

Print Server Installation Manual
9. Enter the following parameters into the mask:
ACTTMR
INACTTMR
If the printer is used solely with the AS/400/iSeries, you can also
enter the parameter value *NOMAX for the keyword ACTTMR.
In this case, the printer will not be released by the AS/400/iSeries at
the end of the print-out.
10. Press the page down key.
The following dialog appears:
Fig. 8: Create Device Description (Printer) - Part 4
11. Enter the following parameters into the mask:
TRANSFORM
MFRPRTYPMDL
PRTCVT
HP 4 may be entered under MFRTYPMDL for all printers supporting
the PCL5 data stream.
AS/400 - Printing via a Device Description
2550
*SEC30
*YES
<manufacturer printer type and model>
e.g. *HP4
*YES
60