Printing In Bs2000 - SEH Print Server Installation Manual

Procedure
Print Server Installation Manual

5 Printing in BS2000

This chapter describes the installation of your print
server in BS2000 environments.
Network printers are integrated into BS2000 by means of a direct
TCP/IP connection. Print data can be transferred from the spooler to
the InterCon print server via TCP/IP ports.
For this purpose, you must configure the port number. To do this,
you must install a printer port and enter the port number. With
BS2000 systems, the TCP/IP port 2900 is used to implement a
bidirectional socket connection.
Refer to the print server documentation for more information on
TCP/IP ports.
Follow the instructions to carry out the installation:
Saving the IP address of the Print Server
Configuring the Print Server for TCP/IP
Entering the IP Address
Installation of the Print Server in the RSO Spooler
Defining TCP/IP Ports
Printing in BS2000
46