SEH Print Server Installation Manual page 22

Requirements
Print Server Installation Manual
With print servers with several physical printer ports, the logical
printer is used to address the port. For more information, please read
the section 'Logical Printers' in the user manual.
The print server is known to the network via its IP address, see:
13.
The host name has been assigned to the IP address, see:
The print server is connected and the printer is turned on.
Proceed as follows:
1. Stop the print daemon:
enq -G
2. Enter the print server into the '/etc/qconfig' file:
Syntax: <name of print queue>:
host = <host name of the print server>
rq = <logical printer>
device = drp0
drp0: backend = /usr/lpd/rembak
Example: MY_QUEUE:
host = IC0001FF
rq = lp1
device = drp0
drp0: backend = /usr/lpd/rembak
3. Start the print daemon:
enq -U -P MY_QUEUE
Printing via the LPD Protocol
12.
22