Aix Without Smit - SEH Print Server Installation Manual

What entries are
necessary?
Print Server Installation Manual
4. Enter the following parameters into the screen mask:
Example: Name of QUEUE
Queuing DISCIPLINE [first come first serve]
ACTIVATE the queue?
Destination HOST
Pathname SHORT FILTER
Pathname LONG FILTER
Name of QUEUE for remote printer [lp1]
5. Compare the entries in the queue:
'Remote Printer Queuedevices'
6. In some cases, the queue must be restarted:
'Manage local Printer Subsystem'
'Local Printer Queues'
7. Check whether the '/etc/qconfig' file contains the following
entry:
Example: MY_QUEUE:
device=drp0
up=true
host=IC0001FF
rq=lp1
drp0:
backend=usr/lpd/rembak
2.3

AIX Without SMIT

When installing the print server in the spooler of an AIX system as a
remote printer, you must enter a print queue, a host name, and a
logical printer into the '/etc/qconfig' file. In this section, manual
installation without using the SMIT Administration Tool is described.
The following entries are required for the installation:
Box in qconfig
-
host
rp
User input
Freely definable name for a print
queue
Host name or IP address of the
print server
lp1 to lp8 for the logical printer
Printing via the LPD Protocol
[MY_QUEUE]
[yes]
[IC0001FF]
[ ]
[ ]
Example in the text
MY_QUEUE
IC0001FF
lp1
21