Fmdump -E Command; Using The Fmadm Command; Using The Fmadm Faulty Command - Fujitsu SPARC Enterprise M3000 Service Manual

3.5.4.2

fmdump -e Command

To get information of the errors that caused this failure you can use the -e option, as
shown in the following example.
# fmdump -e
TIME
Nov 02 10:04:14.3008 ereport.io.fire.jbc.mb_per
3.5.5

Using the fmadm Command

3.5.5.1

Using the fmadm faulty Command

The fmadm faulty command can be used by administrators and service personnel to
view and modify system configuration parameters that are maintained by the Oracle
Solaris Fault Manager. The command is primarily used to determine the status of a
component involved in a fault, as shown in the following example:
# fmadm faulty
STATERESOURCE / UUID
-------- --------------------------------------------------------
degraded dev:////pci@1e,600000
# fmadm repair
The PCIe slot has been degraded and it is associated with the same UUID as above.
Also, the "faulted" status may be displayed.
CLASS
0ee65618-2218-4997-c0dc-b5c410ed8ec2
0ee65618-2218-4997-c0dc-b5c410ed8ec2
Chapter 3 Troubleshooting 3-17