Figure 2-1 Disassembling The Slide Rail Before Installation - Sun Microsystems Sun Fire V210 Installation Manual

2. Locate the slide rail lock at the front of one of the slide rail assemblies, as shown
in .
FIGURE 2-1
3. Squeeze and hold the tabs at the top and bottom of the lock while you pull the
mounting bracket out of the slide rail assembly, until it reaches the stop. See
.
FIGURE 2-1
4. Pull the mounting bracket release button toward the front of the mounting
bracket, as shown in
bracket from the slide rail assembly.
5. Repeat for the remaining slide rail assembly.
slide rail lock
Disassembling the Slide Rail Before Installation
FIGURE 2-1
, and simultaneously withdraw the mounting
FIGURE 2-1
Mounting bracket
release button
Chapter 2 Installing the Hardware 7