Introduction To The Sun Fire V210 And V240 Servers Installation; Previewing The Installation Process - Sun Microsystems Sun Fire V210 Installation Manual

1
C H A P T E R
Introduction to the Sun Fire V210
and V240 Servers Installation
This chapter provides a description of the Sun Fire servers and gives an overview of
the installation process. The chapter contains the following sections:
"Previewing the Installation Process" on page 1
■
"Verifying the Contents of the Shipping Kit" on page 3
■
"Using the Sun Advanced Lights Out Manager Software" on page 3
■

Previewing the Installation Process

This section contains an overview of the installation process. Each step in the
procedure includes references to the appropriate instructions that you must
complete. Each step must be completed in order.
1. Prepare the site for the power, clearance, and environmental requirements.
If you are installing the server into a new Sun rack, you must fully prepare the
site for the installation. If you are installing the server into an existing rack, you
must conduct some site preparation to satisfy the additional power and
environmental requirements. Refer to the Sun Fire V210 and V240 Getting Started
Guide for specific instructions.
2. Verify that you have received all of the components.
The Sun Fire server ships in several packages. See
Shipping Kit" on page 3
3. Install the server into the rack.
for a list of the shipping kit.
"Verifying the Contents of the
1