Follow-Up Steering; Non-Follow-Up Steering; Nfu Steering Lever; Nfu Push Button Remote Control - Simrad AP35 Instruction Manual

2.3 Follow-Up steering

When both the PORT and STBD push buttons are pressed simultaneously
the AP35 is set to Follow-Up steering mode and rudder commands can be set
by the course dial. One revolution of the dial equals 45° rudder command.
The rudder will move to the commanded angle and stop.
PORT
Press both buttons
simultaneously to
activate Follow-Up
WARNING !
While in Follow-Up mode, you cannot take manual control of the
vessel.

2.4 Non-Follow-Up steering

In STBY mode, when the PORT or STBD push button is pressed separately,
the actual rudder angle is shown on the secondary display and the rudder will
move as long as the button is pressed.
Activates
PORT
Rudder
command

2.5 NFU Steering lever

In STBY mode the rudder will move as long as the lever is offset to Port or
Starboard

2.6 NFU Push button remote control

In STBY mode the rudder will move as long as the Port or Starboard button
is pressed.
Note !
When a NFU steering lever or remote control is operated, the control unit(s)
become "Inactive".
22083083H
STBD
PORT
NFU
Actual rudder angle
FU
22
12
P
S
STBY
OFF
STBD
Activates
03
STBD
Rudder
command
Operation
Follow-Up mode.
Commanded rudder angle:
22° to stbd.
Rudder angle:12
Use course knob to
command rudder angle.
Return to manual control in
STBY by pressing the
STBY button.
NFU
05
Actual rudder angle
17