Software Setup Procedure; Description Of Installation Settings - Simrad AP35 Instruction Manual

4.32 Software Setup Procedure

Description of Installation Settings

The design of the AP35 includes advanced features that have simplified the
installation and setup of an autopilot. The principle advantage is that manual
adjustments that needed to be done on previous models are no longer
necessary with the AP35.
Note !
The installation settings must be performed as part of the installation of the
AP35 system. Failure to correctly set the values in the installation settings
may prohibit the AP35 from functioning properly!
The Installation Settings are grouped into the following functional
categories:
• Language:
• Dockside Settings:
• Interface Setup:
• Seatrial Settings:
• View Parameters
Each group is designed to focus on specific functions related to an
installation activity, and enable quick access when changes need to be made.
Some important points regarding the installation settings values:
• When the AP35 is delivered new from the factory, (AND ANY TIME
• The Dockside, Interface and Seatrial settings can only be accessed when
• The values that are selected (also referred to as "PARAMETERS") from
• The Installation Settings are considered global, enabling values to be
• The values in the Seatrial Settings are dependent on successful
Before attempting to turn on the AP35 and perform an Installation Setup, the
hardware installation and electrical installation must be completed in
accordance with the installation instructions.
22083083H
AFTER A MASTER
PERFORMED) the Installation Settings are all reset to preset (default)
values. The warning message "Installation Setup Required" will appear at
turn on and if an attempt is made to access the AUTO or NAV modes.
the system is in STBY mode.
within the Installation Settings Menu, are stored in the memory of the
AP35 system. No specific action is required to "SAVE" the selected
values. Once the value is changed, it is stored until the next time the
menu item is selected and changed.
available to all control units in the system.
completion of the Dockside Settings.
Selects language used for display information
Sets values of items to be set prior to seatrials
Sets the identification of navigation and optional
equipment connected to the AP35 system
Determines automatic calibrations and steering
parameters
Permits viewing, setting, or changing steering
parameters
RESET OF MEMORIES
Installation
HAS BEEN
71