Lock Function - Simrad AP35 Instruction Manual

Simrad AP35 Autopilot

2.17 Lock function

The "LOCK" function is a safety feature included in the AP35 system to
disable all control units except for a single, user selected control unit
location.
When the "lock" function is in use, no transfer of command may take place;
only the "active" control unit stays in command.
To enable the "lock" function, make a quick double press on the STBY
button.
STBY
OFF
The display on the "active" control unit will first show a single key icon
followed by the primary display on which the key icon will alternate with the
mode index.
The "locked" control units in the system will show:
The "Lock function is disengaged by the following actions:
• The "active" control unit unlocks by a double press on the STBY button.
• The system is switched OFF by any control unit (press STBY for 2-3
After having "unlocked" the other control stations, the "active" control unit
will show the above symbol before the display returns to normal. All other
control units will return to the "inactive" state.
26
STBY
OFF
seconds).
S 123
RFC
HI
12
Inactive
123
123
RFC
HI
12
22083083H