Operation Of The Autopilot; Overview; Figure 2-1 Ap35 Front Panel - Simrad AP35 Instruction Manual

2 OPERATION OF THE AUTOPILOT

Caution !
An autopilot is a very useful navigational aid, but DOES NOT under any
circumstance replace a human navigator.
Do not use automatic steering when:
• In heavy traffic areas or in narrow waters
• In poor visibility or extreme sea conditions
• In areas where use of autopilot is prohibited by law
When using an autopilot:
• Do not leave the helm unattended
• Do not place any magnetic material or equipment near magnetic or
• Verify at regular intervals course and position of vessel
• Always switch to Standby mode, and reduce speed in due time to avoid

2.1 Overview

The control unit shown above can operate as a stand alone unit in an
autopilot system or combined in a multistation system. In a multistation
system the command can easily be transferred from one unit to another.
Units not in control will display "Inactive".
The AP35 system is capable of the following primary steering modes: STBY
(manual steering), AUTO, NAV, WORK and TURN, each mode having a
dedicated push button.
Each of the mode push buttons is clearly identified with the primary function
in large text, and a secondary function listed in smaller text. Each button
provides you with the ability to access a primary display, a secondary
display and/or multiple function displays.
22083083H
fluxgate compass used in the autopilot system
hazardous situations

Figure 2-1 AP35 Front Panel

Operation
15