User Set-Up Menu - Simrad AP35 Instruction Manual

2.18 User Set-up Menu

Quick double
press
NAV
SETUP
Enter User
Setup Menu
STBD
- SETUP -
Backlight
03
- SETUP -
Contrast
05
- SETUP -
Select Comp.:
RFC COMP.
- SETUP -
Seastate
Filt.: OFF
- SETUP -
NAV. source:
GPS 1
- SETUP -
POS. Source:
GPS 1
NMEA TEST?
SYSTEM DATA?
PORT
TOP
Note !
It is necessary to select the correct compass and Nav. source to make the
autopilot operate.
22083083H
- SETUP -
Backlight
03
BACK
Displays User
Set-up Menu
Adjust backlight of display and pushbuttons (10 steps,
10 = brightest). Setting is stored when system is
turned off, and resets to stored level at turn on.
Adjustment is local to the control head you adjust.
Adjust contrast of displays (10 steps). Setting is stored when
system is turned off, and resets to stored level at turn on.
Adjustment is local. All steps not available at high temperature
due to automatic temperature compensation.
Select the compass to be used for AUTO steering.
Refer to the interface setup table in section 4.
RFC COMP = Robertson Fluxgate compass
MAGNET COMP = Magnetic compass
OTHER FLUXG = Non-Robertson fluxgate compass (sin/cos)
GYRO COMP = Robertson gyrocompass (using 1:1 synchro)
NMEA COMP = NMEA compass
Set the Sea State filter.
OFF: Provides precise steering but increases rudder activity.
AUTO: Reduces rudder activity and reduces sensitivity of
autopilot in rough weather automatically.
MANUAL: Sets yawband manually (1-10).
Select the source for NAV mode steering.
Refer to interface setup table in section 4.
Select the source of speed over ground (SOG) and position data
processed by the AP35. This option will appear whenever there is
more than one navigation receiver connected to the system.
Test functions for analysing system data (See "NMEA test" and
"System Data menu" under the "Trouble shooting" section).
Except when NMEA TEST or SYSTEM DATA is displayed, the menu
will disappear after 60 seconds if no key is pressed. It will disappear
immediately if any mode key (STBY, AUTO, NAV, WORK, TURN)
is pressed.
FWD
Scrolls through menu
selections or sets
value on menu items
Operation
STBD Sequences
FWD in MENU
Sequences
PORT
BACK in
MENU
27