Adding Or Replacing Memory Modules - Gateway Convertible Service Manual

Adding or replacing memory modules

Tools you need to complete this task:
Memory bay
To add or replace memory modules:
1
2
3
www.gateway.com
Important
Use only memory modules designed for this Gateway convertible notebook.
Phillips #0 screwdriver
Complete the steps in "Preparing the convertible notebook" on page
Loosen the screws that secure the memory cover. (These screws cannot be removed.)
Remove the memory bay cover. Be careful not to break off the tabs located on the bottom
of the cover. If the cover does not remove easily, wiggle the cover to loosen it.
Screw
Screw
Screw
Screw
5.
Screw
Screw
9