Gateway Convertible Service Manual page 23

7
Pull the card out of the slot.
8
Hold the new card at a 30-degree angle and press it into the empty slot. This card is keyed
so it can only be inserted in one direction. If the card does not fit, make sure that the notch
in the card lines up with the tab in the card slot.
9
Move the antenna cables out of the way.
10
Press the card down until it clicks into place.
-OR-
Press the card down, then replace the screws removed in
11
Reattach the antenna cables to the connectors.
12
Replace the wireless bay cover, then tighten the cover screw.
www.gateway.com
Step 6.
19