Table of Contents
Advertisement
Adding or replacing memory modules
Tools you need to complete this task:
To add or replace memory modules:
1
2
3
6
Replacing Convertible Notebook Components
Important
Use only memory modules designed for this Gateway convertible notebook.
Phillips #0 screwdriver
Complete the steps in
"Preparing the convertible notebook" on page
Loosen the two memory bay cover screws that secure the memory cover. (These screws
cannot be removed.)
Remove the memory bay cover. Be careful not to break off the tabs located on the bottom
of the cover. If the cover does not remove easily, wiggle the cover to loosen it.
Memory
bay
Screw
Screw
5.
Advertisement
Table of Contents
