Tools - Strong SRT 8113 User Manual

PART 1 • English
Use p q to select Parental Lock from the System Setup menu and press ok to proceed. You will be
asked to enter your pin code. (dEfAulT PIn: 1234)
Menu Lock:
Rating Lock:
New Password:
Confirm Password:
7.4.7 osd setting
This menu allows you to change settings for: OSD Timeout and OSD Transparency.
OSD timeout:
OSD Transparency:
7.4.8 favourite list Rename
This menu allows you to personalize the names of the 8 available favourite lists.
Use p q to select Favourite from the System Setup Menu and press ok to proceed. The names of all groups
are now displayed. Select favourite group with p q and press ok to edit its name. A text field will now pop
up at the right of the screen. Use t u p q to select characters and enter them with ok. When you have
finished editing, press bluE to save the changes. When all changes have been made, press EXIT twice.
7.4.9 multiview settings
This menu allows you to select how you like to display the mosaic for Multi view of more channels on
your screen. This selection will be activated if you press in viewing mode the mosAIC button.

7.5 Tools

Press mEnu in viewing mode to enter the Main Menu.
Select the Tools submenu with p q and press ok or u to enter.
Use p q to highlight the submenu of choice and press ok proceed.
Press EXIT to leave.
7.5.1 Receiver Information
This submenu shows receiver specific information such as hardware version and software version. It
also displays our web address www.strong.tv. Please have the Information screen on hand when you
call our hotline. The person who answers your call might ask for the information given in this screen.
7.5.2 factory setting
This option allows you to reset the receiver to factory settings, which clears all stored channels.
WARnIng:
Use p q to select " Factory Setting" in the Tools menu and press ok. You are asked to input password.
Locks the installation menu. You can set Menu Lock to On or Off.
Choose between: Off, AGE 10, AGE 12, ...up to AGE 18. Channels with a
parental rating above the chosen age will be protected with a password (if
available in your local broadcast.)
Enter your new password (4 digits) here.
Re-enter your password here to confirm.
Sets the time after which on screen banners and messages disappear. The
range is 1~10 seconds.
To set the OSD transparency from Off ~ 40% with 10% steps.
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. It will restore your receiver to an "out of
the box" state. Please use this option with care.
17