Tools - Strong PRIMA VI User Manual

PART 1 • English

7.4 Tools

Press mEnu in viewing mode to enter the Main Menu.
Select the Tools submenu with pq and press ok or u to enter.
Use pq to highlight the submenu of choice and press ok proceed.
Press EXIT to leave.
7.4.1 Information
This submenu shows receiver specific information such as hardware version and software version. It
also displays our web address www.strong.tv. Please have the Information screen on hand when you
call our hotline. The person who answers your call might ask for the information given in this screen.
7.4.2 load factory settings
This option allows you to reset the receiver to factory settings, which clears all stored channels.
WARnIng!
Use pq to select Load Factory Settings in the Tools menu and press ok. You are asked to input your
PIN code.
Input the correct PIN code using the 0~9 (dEfAulT PIn: 1234). A confirmation window is displayed.
Select Yes to return to factory settings. Select No to cancel.
Press EXIT to leave.
7.4.3 s/W upgrade by oTA
This receiver is equipped with an Over The Air software upgrade function. An Over The Air update
might not be available in your region. Please visit our website www.strong.tv or contact your local
service hotline for more information about this option.
7.4.4 upgrade by usb
This feature allows you to upgrade receiver software via the USB port. When new software is available
for your receiver, it can be downloaded from our website www.strong.tv.
Place the software file (unzipped) in the root directory of your USB storage device (HDD, memory
stick etc.) and connect the device to the USB port of the receiver.
Select Upgrade by USB from the Tools menu and press ok to proceed.
The upgrade menu will now be displayed.
Use pq to select Upgrade Mode and choose option Allcode.
Use pq to select Upgrade File and choose the file containing the latest and correct software.
Once all settings are made, move the highlight to Start and press ok to start the upgrade process.
After a few seconds, the receiver asks: "Are you sure to burn flash?". Select Yes to finalize the upgrade
or No to quit without upgrading.
If, after a software upgrade, the receiver should behave in an unexpected way, please perform a factory
reset as well. See chapter 7.4.2.
WARnIng!
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
After an update the receiver restarts automatically. During the upgrade
process NEVER disconnect the receiver from the mains or switch off the
power! Doing so might damage your receiver and will void warranty!
15