Tools - Strong SRT 8526 User Manual

6.4 Tools

Press mEnU and use tu to select Tools, then press ok. Following submenus will be displayed:
Timers, Information, Change Password, USB Upgrade, OAD Upgrade and Remove USB device.
Use pq to select a submenu and press ok or u to access.
6.4.1 Timer
The timer function allows you to turn the receiver on and off according to the defined settings.
Timers can be set from the EPG in the most convenient way but you can also set timers manually via
this menu.
In the menu Schedule, a summary of the configured timers will be displayed: number, channel
name, date, start and end time, repeat and timer status.
noTE:
You can add, change or delete a timer.
Add:
Channel Type:
Channel No.:
Channel Name:
Start Date:
Start Time:
End Time:
Repeat:
Mode:
In viewing mode, the receiver will notify you 10 seconds before a timer starts. You can confirm the
timer by pressing ok or cancel with ExIT. If there is no input given, the timer will be executed. After
the timer event has been finished, the receiver switches to the last watched channel. If the receiver
was in standby, it automatically turns to standby again after the timer passed.
If you already have timers in the list you can use these functions as well:
Edit:
Delete:
After your settings have been made, you can leave the menu with ExIT.
16
The list will be empty if there are no configured timers.
To add a timer, press the RED button. Use tu pq and 0-9
in the menu to configure the settings for the event. After the
settings have been made, set the necessary parameters and press
ok to apply the timer into the list.
Use tu to choose between TV and radio programmes (the radio
option is not available if there are no radio channels broadcasted/
in the channel list).
Use tu to select the channel number to which you want to switch.
Shows the name of the chosen channel.
Use 0-9 to enter the date on which the timer should switch the
receiver on. Please consider the date format "dd/mm/yyyy. "
Use 0-9 to enter the start time.
Use 0-9 to enter the end time.
Use tu to select in which cycle the timer should be repeated.
Once - the timer will switch ON once, after this the timer will be
removed from timer list. Daily - the timer will switch ON every day
at the set time. Weekly - the timer will switch ON once a week at
the set time.
Use tu to select between View and Record. If you have selected
View then receiver will switch to channel according to timer
setting. If you have selected Record then receiver will start a
record according to timer setting.
If you wish to change some settings for a present timer, use pq
to select the timer and press gREEn to open it. Afterwards you
can define the settings like described in above.
For deleting a timer you don't need, use the pq buttons to
select the timer and press blUE to delete it. A message will be
shown where you can press ok to confirm deletion or ExIT if you
wish to keep the timer.
PART 2 • English