Strong SRT 8113 User Manual page 15

PART 1 • English
dvR:
REd:
gREEn:
YElloW:
EXIT:
7.1.2 dvR storage Information
This option shows relevant information about the connected USB storage device.
Also you can format your USB storage device into FAT32.
Select DVR Storage Information from the Media menu and press ok to enter.
Now you will see all details as Free and used Recoding Sizes and used file system.
Press the YElloW button Format menu to format the connected USB device.
Please, enter the PIN to access this menu and press ok to start formatting.
Select Cancel or press EXIT to leave without formatting.
WARnIng:
noTE:
Press EXIT to leave.
7.1.3 dvR settings
The DVR Settings menu allows you to setup the Timeshift, Jump function for playback and type
recordings. Select DVR Settings from the Media menu and press ok to enter.
Timeshift:
Jump:
Timeshift to Record:
PS Record:
Press the "Red" Rename button to open the rename window to rename a
recording.
Move the highlight to the programme that you want to lock. When pressing
the "Green" Lock button, it will ask you to input password. The default
password is "1234". After input of correct password, the programme is locked.
If you want to unlock the programme, press the "Green" Lock button again.
Move the highlight to the program me that you want to delete. When
pressing the "Yellow" Delete button, it will ask you to input password. The
default password is "1234". After input of correct password, the programme is
marked with a lock.
If you want to unlock the programme, press the "Yellow" Delete button again
or press EXIT to delete the selected recording(s).
Return, Stop, one step back or press ok to start play mode.
Formatting will permanently delete ALL data stored on the connected device.
Please make a backup copy of all data you wish to keep before entering the
Format menu. STRONG cannot be held responsible for loss of data from USB
devices used with this receiver.
It is possible to use already NTFS formatted USB disks.
On/Off. Select On if you like to activate Timeshift by pressing the YElloW
button. Timeshift will already start in the background directly after you tune
into a channel. Select Off to disable Timeshift. The YElloW button will now
only freeze the TV screen.
30 sec to 30 min. Set the time step you like to jump forward or backwards with
the buttons 8 or 7 during playback of recorded files.
On/Off. Select On if you like to keep a copy of the last made Timeshift by
pressing the 4 button. Select Off to disable.
On/Off. Select On if you like to reduce recording data. The recording will not
record TXT, extra Subtitles or Audio channels on SD channels. Select Off to
disable and all data of recorded channel will stored to the record.
11