Table of Contents
Advertisement
Problem
After moving the
receiver to another
room/area you
are no longer able
to receive digital
reception
The receiver
switches off
automatically.
9.0 TEChnICAl sPECIfICATIons
demodulator
Demodulator:
Transmission mode:
video decoder
Profile level:
Video resolutions:
Decoding & Video out:
Aspect ratio:
Audio decoder
Audio support:
MPEG MusiCam Layer II
Sampling rate:
Audio mode:
*Dolby and the double-D symbol are registered trademarks of Dolby Laboratories
Tuner
Front End:
Input frequency range:
Loop through frequency range:
Input signal level:
modulator
UHF RF modulator, channels 21 – 69, default channel 38
memory and system
Flash memory:
SDRAM:
20
Possible cause
Antenna signals are too weak Press the Info button on remote 2x to
Auto Standby function
enabled.
call up signal bars and adjust antenna for
(maximum) reception
or rescan channels
Disable auto standby. See section 7.3.4.2
for details.
COFDM; 16 QAM/64 QAM, QPSK
2 K - 8 K
MPEG-2 MP@ML, AVC/H264HP@L4.1, MPEG-4 ASP
supported
480i/576i/576p/720p/1080i/1080p
PAL
4:3 Letterbox, 4:3 Pan & Scan, 16:9, Auto
AAC/Dolby® Digital Plus*/AC3/PCM
32, 44.1, 48 kHz
Stereo, Joint Stereo, Dual Mono, Mono
DVB-T, UHF & VHF Tuner
174 ~ 230 MHz (VHF) and 470 ~ 862 MHz (UHF)
47 ~ 862 MHz
-82 ~ -20 dBm
4 Mbytes
128 Mbytes
PART 1 • English
What to do
Hide quick links:
Advertisement
Table of Contents
