Tools - Strong SRT 8205 User Manual

7.3.5 Parental Lock
This menu allows you to protect the installation menu and/or channels with a PIN code. You can also
enter a new PIN code in the Parental Lock menu.
You will be asked to enter your PIN code. (DEFAULT PIN: 1234)
Menu Lock:
Parental Rating:
New Password:
Con rm Password:
7.3.6 OSD Setting
This menu allows you to change settings for: OSD Timeout and OSD Transparency.
OSD Timeout:
OSD Transparency:
Load Default OSD Setting:
7.3.7 Auto Standby
Auto Standby is a feature that helps you reducing power consumption.
When set to 30Min/1 Hour/2 Hours or 3 Hours, the receiver will switch to standby if it doesn't receive
any commands during this time.
Set Auto Standby to O to deactivate the automatic standby function.

7.4 Tools

Select the Tools submenu with  and press OK or  to enter.
It consists of following sub-menus: Information, Load Factory Setting, S/W Update by OTA, Upgrade by
USB and Auto-update OTA.
7.4.1 Information
This submenu shows receiver speci c information such as hardware version and software version. It
also displays our web address www.strong.tv.
Please have the Information screen on hand when you call our hotline. The person who answers your
call might ask for the information given in this screen.
7.4.2 Load Factory Settings
This option allows you to reset the receiver to factory settings, which clear all stored channels.
WARNING:
Use  to select Load Factory Settings in the Tools menu and press OK. You are asked to input your
PIN code.
18
Locks the installation menu. You can set Menu Lock to On or O .
Choose between: O , 4 years and up to 18 years. Channels with a parental
rating above the chosen age will be protected with a PIN code (if available in
your local broadcast.)
Enter your new PIN code (4 digits) here.
Re-enter your PIN code here to con rm.
Sets the duration time of on screen banners and messages remove. The
range is 1~10 seconds or Always On.
To set the OSD transparency from O ~ 40% with 10% steps.
Press OK to clear all OSD settings and reset to default values.
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.