PART 1 • English
1.3 Equipment set-up
We recommend you consult a professional installer to set up your equipment. Otherwise, please
follow the instructions below:
Refer to the user manual of your TV and antenna.
Make sure that the HDMI cable and outdoor components are in a good condition.
If you use TV SCART connection, use then well shielded SCART cable.
This manual provides complete instructions for installing and using this receiver. The following
symbols will serve as follow.
WARnIng:
Tips:
mEnu
Move to
1.4 Accessories
User manual
1 remote control unit
2x batteries (AAA type)
Male/Female antenna cable
1 active indoor antenna with cable
noTE:
1.5 usage of external usb devices
It is recommended to use USB 2.0 storage devices or higher. If your device is not
compatible to USB 2.0 specifications, recording, playback and other multimedia
functions of the receiver might not work properly.
To ensure best performance of your USB storage device please format it by this
receiver (menu "Media, DVR Storage Information") to FAT32 system. Other file systems
are not supported by the receiver. However, it is possible to use already NTFS
formatted disks. STRONG cannot guarantee compatibility with all types of USB storage
devices.
It is advised not to store important information on USB storage devices used with
the receiver. Always make backups of data on your USB storage device before using
it with this receiver. STRONG will not take responsibility for any loss of information or
circumstances caused by loss of information.
2.0 YouR RECEIvER
2.1 PIn-CodE dEfAulT: 1234
2.2 front Panel
mode indicator RED indicates that the receiver is in STANDBY mode.
1.
Indicates warning information.
Indicates any other additional important or helpful information.
Represents a button on the remote control or the receiver. (bold Character)
Represents a menu item within a window. (Italic Character)
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
GREEN indicates that the receiver is in OPERATING mode.
Fig. 1
3