Tools - Strong SRT 8903 User Manual

7.4 Tools

Press mEnu in viewing mode to enter the Main Menu.
Select the Tools submenu with pq and press ok or u to enter.
Use pq to highlight a submenu and press ok to proceed.
Press EXIT to leave.
7.4.1 Information
This submenu shows receiver specific information such as the hardware version and the software version.
It also displays our web address www.strong.tv. Please have the Information screen on hand when calling
our hotline. The person who answers your call might ask for the information given in this screen.
7.4.2 load factory setting
This option allows you to reset the receiver to the factory settings, which clears all stored channels.
WARnIng:
Use pq to select "Load Factory Setting" in the Tools menu and press ok. You are asked to enter your
password.
Enter the correct password with the 0~9 buttons (default: 1234). A confirmation window is displayed.
Select Yes to return to the factory settings. Select No to cancel.
Press EXIT to leave.
7.4.3 s/W upgrade by oTA
This receiver is equipped with an Automatic Over The Air software upgrade function. When
the receiver is switched to standby mode, "SrCH" is displayed on the front panel. The receiver
automatically checks new software. If the receiver detects new software, the user will be notified about
the new software availability at the next power on. Use the tu buttons to select Yes to process the
software update, or select No and press the ok button to cancel and proceed to the normal operation
mode. If new software is not available, the receiver switches to standby and displays the current time.
7.4.4 upgrade by usb
This feature allows you to upgrade receiver software via the USB port. If new software is available for
your receiver, it can be downloaded from our website www.strong.tv.
Place the software file (unzipped) in the root directory of your USB storage device (HDD, memory
stick etc.) and insert this device into the USB port of the receiver.
Select Upgrade by USB from the Tools menu and press ok to proceed.
The upgrade menu will now be displayed.
Use pq to select Upgrade Mode and choose option Allcode.
Use pq to select Upgrade File and choose the file containing the new software.
When all settings have been made, move the highlight to Start and press ok to start the upgrade process.
After a few seconds, the receiver asks: "Are you sure to burn flash?". Select Yes to finalize the upgrade
or No to quit without upgrading.
18
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please only use this option if the
receiver suddenly should work in an unexpected way.
PART 2 • English