Table of Contents
Advertisement
Introduction
System Components and Accessories
Xantrex XW Inverter/Charger
1–4
The Xantrex XW Inverter/Charger is a modular "building block" sine-wave
inverter/charger that can be used for both residential and commercial
stand-alone, grid-backup, and grid-tie applications with battery energy storage.
The Xantrex XW Series Inverter/Charger is a self-contained DC to AC inverter,
battery charger, and AC transfer switch.
Up to four inverters can be installed in parallel to create larger 230-volt,
single-phase systems, allowing for increased capacity. Multiple Xantrex XW
Inverter/Chargers can also be connected to create a three-phase system. One
inverter per phase is required, and up to two inverters can be connected in
parallel on each phase.
Figure 1-3 Xantrex XW Inverter/Charger
A Battery Temperature Sensor (Part Number 808-0232-02) is included with the
Xantrex XW Inverter/Charger. The Battery Temperature Sensor monitors the
temperature of the battery bank and adjusts the charging accordingly. For
installation instructions, see page 2–18.
This manual for use by qualified personnel only
975-0384-01-02
Hide quick links:
Advertisement
Table of Contents
