Mitsubishi Electric Apricot XEN pentium Owner's Handbook Manual page 69

SETUP
Disketteless Operation
When this option is set to Disabled the Power On Self Test
(POST) will report the absence of a floppy drive and halt the
boot process. If this option is set to Enabled, POST by-passes
the floppy test and the system will start provided a boot device
is available.
Displayless Operation
When this option is set to Disabled POST will report the
absence of a monitor and halt the boot process. If this option
is set to Enabled, POST by-passes the test and the system
will start without a monitor.
Keyboardless Operation
When this option is set to Disabled POST will report the
absence of a keyboard and halt the boot process. If this option
is set to Enabled, POST by-passes the keyboard test and the
system will start without a keyboard.
Startup Devices
These four menu items allow you to control the sequence in
which the system looks for a bootable drive. The default
sequence is diskette drive 0, then hard disk drive 0. Use these
four options if you wish to alter this sequence, for example
to always boot from the hard disk drive.
Power On Self Test
Power On Self Test (POST) can be configured to run either
only a basic set of tests, or a more comprehensive test suite.
Use this option to select either the Quick set of tests, or to
run the Enhanced tests.
Virus Detection
A virus detection utility is included in the BIOS. This item
allows you to select whether or not the utility is run when
you start the system.
4/14 XEN OWNER'S HANDBOOK