ISA Legacy Resources
Each item in the table above is described in detail later.
The Main Menu commands are:
Load Default Settings Resets all configuration values to the
This menu allows you to register
resources used by ISA cards installed in
the system. Resources affected are:
memory, I/O ports, DMA, and
interrupts used by ISA expansion cards.
Choose this item to view or change
settings of the system's power
Saves the new values of all the settings
you have changed since starting SETUP.
If you choose Exit Setup, described
below, before choosing Save Settings
or Restore Settings, you are prompted
to save before ending the session.
Restores all configuration values to
those that were in effect when you
defaults provided in the BIOS.
Ends the SETUP session. If you have
changed any values and have not chosen
to save or restore the settings, you will
be offered the choice of saving any
changes you made during the current
You can elect to save and exit, to exit
without saving, or to return to the
XEN OWNER'S HANDBOOK 4/3