Expanding the system
The 5.25" drive bay in the system unit can contain any standard
size half height 5.25" device. A range of tape and CD-ROM
drives, and a 5.25" floppy drive, are available for this bay.
The following instructions describe the installation of a drive
in the bay. The Generic instructions apply to all drives, and
describe the physical installation of a drive.
Instructions specific to each drive type are given after the
5/16 XEN OWNER'S HANDBOOK
Power the system down.
Take suitable anti-static precautions and remove the
system unit cover.
If you are unfamiliar with the recommended anti-static
precautions and/or the process of removing the
system unit cover refer to the appendices at the rear
of this manual.
Remove the two screws that secure the drive bay and
slide the bay backwards.