Mitsubishi Electric Apricot XEN pentium Owner's Handbook Manual page 66

Secure Hard Disk and Diskette Drives
This menu allows you to select whether a user will have access
to hard or floppy disk drives. Hard and floppy disk access are
not linked and each can be enabled or disabled independently.
Note
This menu can interact with the Start Options menu. You must
ensure that a user has access to a Startup Device or they will
not be able to use the system at all.
User Password
If you choose the User Password option a menu appears. This
menu allows you to set or delete a user password, and to
choose whether a password prompt is displayed.
When a user password is enabled the password must be
entered every time the system is powered on or rebooted.
Enter User Password
If you wish to enter or change the user password, type the
password in this field (letters and numbers only).
Enter User Password Again
Re-type the password entered above.
Set or Change User Password
Select this when you have entered and confirmed (by re-
entering) the new password. This accepts the password as the
one used in future sessions.
If you have not changed the password using the above two fields
before choosing this item, a menu appears prompting you to press
ENTER
you are setting the password to "no password" and deleting any
existing password from the system. If you have made a mistake,
press the
to confirm the deletion of any existing passwords. In effect,
key to return to the Main Menu.
ESC
XEN OWNER'S HANDBOOK 4/11
SETUP