Table of Contents
Advertisement
SETUP
Each user definable resource can be set to either Available
or Not available.
Resources that are Available are assumed by the system not
to be in use by an ISA adapter, and can therefore be allocated
by the PCI and PnP auto-configuration processes. Those
resources that are Not available are assumed to be in use
and are excluded from the auto-configuration process.
Menu
Memory Resources
I/O Port Resources
DMA Resources
Interrupt Resources
Power management
The Power Management menu gives you control over the
system's power saving features. These are: System Standby,
Hard Disk Standby, Monitor Power Management, and
Security Mode.
System Standby
This option can be set to Disabled, After 5 minutes, After
15 minutes or After 60 minutes.
4/18 XEN OWNER'S HANDBOOK
Resource Allocation
This menu divides the memory map
between A0000h and E0000h into 16k
segments, and between 100000h and
FFFFFFh into 1M segments.
Note
The E0000h to FFFFFh area is always
allocated by the system.
The I/O map is split into blocks of four
ports.
Each
DMA
channel
independently allocated.
Each interrupt can be independently
allocated.
can
be
Advertisement
Table of Contents
