Start Options - Mitsubishi Electric Apricot XEN pentium Owner's Handbook Manual

If you have not changed the password using the above two fields
before choosing this item, a menu appears prompting you to press
ENTER
you are setting the password to "no password" and deleting any
existing password from the system. If you have made a mistake,
press the
Delete Administrator Password
Choose this to delete an existing password (if any). Use this
method when you want to remove or clear the old password
without assigning a new one. A menu appears prompting you
to press
return to the Main Menu and stop the deletion.
User password changeable by user
This option can be set to Yes or No. When it is set to No,
and an Administrator password is set, only the Administrator
can change the User Password.
If this option is set to Yes the User Password can be changed
by anyone who knows the current password.

Start Options

This menu allows you to set or change the actions of the
system on startup or boot.
Keyboard NumLock State
This option sets whether or not keyboard number lock is on
(numeric keypad enabled) or off (numeric keypad disabled)
when you boot the system. Default is On.
Keyboard Speed
This option sets whether or not keyboard repeat speed is
normal or fast when you boot the system. Default is Fast.
to confirm the deletion of any existing passwords. In effect,
key to return to the Main Menu.
ESC
to confirm the deletion. Press the
ENTER
XEN OWNER'S HANDBOOK 4/13
SETUP
key to
ESC